Release Notes

Table 44. Known issues (continued)
Issue ID Description Workaround
LS-607 When the INI parameters for USB Devices are configured on the
client without the BIOS administrator password, changes that
are made in BIOS settings are not applied in USB Manager.
Set the BIOS password.
TL-1151 802.1x settings that are configured using the GUI options are not
preserved across system restarts.
Use INI parameters to configure the 802.1x
settings.
TL-1140 Google Chrome is opened with the Set as default browser
option enabled.
Set Google Chrome as the default browser.
The Chrome browser works without any
issues.
TL-1028 CAC is not found when you log in to the VMware Horizon session
using the onboard smart card reader.
There is no workaround.
TL-1119 After doing OEM branding, the services list is displayed during
the system boot.
There is no workaround.
TL-731 Wyse 5070 thin client does not automatically connect to a
wireless network once the client is connected to a hidden
network.
Reconnect to the wireless network after
restarting the client.
TL-980 When you connect one 4K and two non-4K displays on the
Wyse 5070 thin client, the values in few drop-down lists are
not displayed. This issue is observed on the Display settings and
connections settings pages.
There is no workaround.
TL-1088 GDM login screen remains blank when you perform imaging on a
dual-display setup.
Switch to one display.
TL-1065 When you switch to the admin mode from system settings
and enter the incorrect password, the incorrect password
message is not displayed. This is not observed on English and
Korean builds.
Enter the appropriate password.
TL-722 AD PAM login takes more than 10 seconds. There is no workaround.
TL-562 The thin client login password expiry function is not supported. Reset the password on the server side.
TL-1044 The Citrix StoreFront connection does not launch the second
time if the first attempt is a failure (when the target desktop is
turned off). If the desktop is turned on, you must restart the thin
client.
There is no workaround.
TL-753 When you connect the display to DP2 and change the display
rotation to right, you cannot move the mouse cursor to the lower
edge of the screen.
Connect the display to DP1.
TL-887 Ericom show menu bar options are not displayed with the
respective system languages.
There is no workaround.
TL-1164 When the Ericom Power term connection is created using the INI
parameters, the COM2 port is not displayed in the Port section.
There is no workaround.
TL-896 When you enter a command in the Ericom console by using the
keyboard, the Ericom menu bar options are getting selected.
There is no workaround.
Limitations
Multidisplay support on Wyse 5070 extended thin client
When you set the 2K resolution for the primary display and open System Settings on the same display, the drop-down menu
appears blank in all features except Display.
ThinLinux version 2.2.0.00
43