Deployment Guide
Table Of Contents
- Dell Wyse ThinOS Version 9.1 Migration Guide
- Contents
- Introduction
- Wyse Management Suite Environment Automation using DHCP and DNS
- Register ThinOS devices using Wyse Device Agent
- Add a ThinOS 8.6 device to a group in Wyse Management Suite
- Download the ThinOS firmware, BIOS, and application packages
- Add ThinOS firmware to the Wyse Management Suite repository
- Upgrading ThinOS firmware
- Configuring a ThinOS 9.1 client using Wyse Management Suite
- BIOS Installation
- Delete ThinOS application packages
- Downgrade to previous versions of ThinOS
- Resources and support
- Contacting Dell
○ WMS server or group is changed. System is going to reboot to load full configuration. Press cancel in 60
seconds to prevent reboot.
○ A new firmware or application is available, do you want to upgrade now or defer to the next reboot? The
changes will automatically be applied in 120 seconds.
If you do not select an option, the thin client reboots after 60 seconds. After reboot the new application or firmware is
installed and the thin client reboots again.
● If the Live Update option is disabled, the thin client cannot download and install a firmware or package until the next
reboot. However, the firmware or packages are downloaded in the following scenarios even when the Live Update option is
disabled:
○ When you register the thin client to Wyse Management Suite manually.
○
When you power on the thin client from a power off state.
○ When you change the Wyse Management Suite group.
● When a new firmware or an application notification is displayed on your thin client, clicking Next Reboot will:
○ Displays a notification if you have changed the Wyse Management Suite group and if the files are downloaded from the
new group.
○ Displays a notification if the new firmware or application is downloaded in the same group.
○ Installs the firmware or package after a reboot.
6 Introduction