Administrator Guide
b Click the + icon to add a new NTP server. The NTP Server IP or FQDN box is displayed on the page.
c Enter the NTP Server IP or FQDN Server IP in the NTP Server IP or FQDN box. The + icon and x icons are displayed on the
right side of the box, when you start typing the characters in the box.
• Click the + icon to add the specied NTP server/FQDN to the NTP Server list. If a proper NTP server IP is not entered, then
a warning message is displayed on the page.
• Click the x icon to clear the IP address you have entered in the box.
d The Delete, Up arrow and Down arrow icons are displayed next to the NTP Server name when you hover the mouse over a
particular NTP server in the NTP Server list.
• Click the Delete icon to delete the specied NTP server from the NTP Server list.
• Click Up arrow and Down arrow to change the order of the particular NTP server in the NTP Server list.
NOTE:
• The Up arrow is enabled when the particular NTP server can be moved to the top in the NTP Server list and it is
disabled when the particular NTP server is listed at the top of the NTP Server list.
• Click Down arrow to change the order of the particular NTP by moving it down in the list.
• The Down arrow is enabled when the particular NTP server can be moved down in the NTP Server list and it is disabled
when the particular NTP server is listed at the bottom of the NTP Server list.
4 Click Save to save the changes. Clicking Save button when, Set Time Automatically is in ON position, enables NTP synchronization.
Selecting the language
By default, the Language applet is available only in Admin mode. Any changes made through Language applet is saved and continued for
the built-in thinuser.
From the Select Language drop-down list, select the language of the screen from the list of supported languages and click Save to save
your settings.
Figure 4. Language settings
Conguring the addons
The Addons page enables you to install and remove Add-ons from INI server.
14
Conguring thin client settings locally