Administrator Guide
The New Printer window is displayed. You can congure the printer type based on your preference.
NOTE: If a USB printer is connected, then it is displayed by default. The printer is not found if wrong address is provided or
the USB is not attached.
3 Select a device type from the following options:
• LPT Port—Select this option if your printer is attached to the thin client through an LPT port, and enter valid values.
• Serial Port—Select this option if your printer is attached to the thin client through a serial port, and enter valid values.
• Enter URL—Select this option to enter URL for a local printer, and enter valid values.
• Network Printer—Select this option if you are using a network printer. Use any one of the options for congure your network
printer:
– Windows Printer via SAMBA
– Internet Printing Protocol (ipps)
– LPD/LPR Host or Printer
– Internet Printing Protocol (https)
– Internet Printing Protocol (ipp14)
– Internet Printing Protocol (ipp)
– AppSocket/HP Jet Direct
Enter valid values to search for your printer host on network.
4 After you congure the printer based on your preference, click Forward.
The thin client searches for the available printer drivers.
5 Select a printer driver, and click Forward. You can select the printer driver from database or search for a printer driver to download.
You can also browse to the location where you have saved the PostScript Printer Description (PPD) les, and select the appropriate
le.
6 Specify the Printer Name, Description, and Location.
7 Click Apply.
The printer is listed on the screen.
NOTE
: You can click Print Test Page to test the printer.
8 Right-click the printer icon, and click Properties.
9 Congure the following tabs based on your printing preference:
• Settings—Use this tab to congure the location, device URL, model, and printer state.
• Policies—Use this tab to congure the printer state, error policy, operation policy, starting banner, and ending banner.
• Access Control—Use this tab to set the printing privileges to users.
• Printer Options—Use this tab to congure the general printer settings, such as media size.
• Job Options—Use this tab to specify the default job options for the printer.
• Ink/Toner Levels—Use this tab to view the marker levels and status messages of the printer.
10 Click OK.
The thin client is ready to print.
Conguring the sound settings
By default, the sound screen is available in both User mode and Admin mode. Any changes made on the sound screen is saved and retained
for the built-in thinuser.
1 Click the Output tab to congure the audio output settings.
26
Conguring thin client settings locally