Administrator Guide

• Round-robin
• Active Backup
• XOR
• Broadcast
• 802.3ad
• Adaptive transmit load balancing
• Adaptive load balancing
4 Link Monitoring — Select the type of link monitoring from the drop-down list. The available options are:
• MII (recommended)
• ARP
5 Enter the time in ms for the link up delay duration.
6 Enter the time in ms for the link down delay duration.
c Click the IPv4 Settings tab, and do the following:
1 From the drop-down list select the following method for IPv4 authentication.
• If Automatic (DHCP) method is selected, you must congure the following options:
1 Additional DNS Servers — Type the IP addresses of domain name users that are used to resolve host names. Use
commas to separate multiple domain name server addresses.
2 Additional Search Domains — Type the IP addresses of domains used when resolving host names. Use commas to
separate multiple domains.
3 DHCP client ID — Enter the ID for the DHCP client. This client identier allows the network administrator to
customize your computer’s conguration.
4 Require IPv4 addressing for this connection to complete — The IPv4 address is required to complete the
connection. If the IPv4 address is not available, then the connection is not congured.
5 Click the Routes button to edit IPv4 routes for Bond connection.
a Click Add to add an IP address. After an IP is added, Netmask, Gateway and Metric specic to that IP are
displayed.
b Select the check box if you want to ignore the automatically obtained routes.
c Select this check box if you want to use your connection only for resources on that particular network.
• If Automatic (DHCP) addresses only method is selected, you must congure the following options:
1 DNS Servers — Type the IP addresses of domain name users that are used to resolve host names. Use commas
to separate multiple domain name server addresses.
2 Search domains — Type the IP addresses of domains that are used when resolving host names. Use commas to
separate multiple domains.
3 DHCP client ID — Enter the ID for the DHCP client. This client identier allows you to customize your computer’s
conguration.
NOTE
: The other settings remain same as described in automatic (DHCP) method for IPv4
authentication.
• If Manual method is selected, you must congure the following options:
1 Click Add to add an IP address. After an IP is added, Netmask, Gateway specic to that IP are displayed.
2 DNS Servers — Type the IP addresses of domain name users that are used to resolve host names. Use commas
to separate multiple domain name server addresses.
3 Search domains — Type the IP addresses of domains used when resolving host names. Use commas to separate
multiple domains.
NOTE
: The DHCP client ID option and Ignore automatically obtained routes check boxes are disabled.
The other settings remains the same as described in automatic (DHCP) method for IPv4 authentication.
34 Conguring thin client settings locally