Administrator Guide
Figure 40. Ericom PowerTerm login settings
Table 8. Ericom PowerTerm login settings
Parameter Description
Connection type On the Connection Type page, click the Network or Serial Port radio
button depending upon the requirement. By default, the Network option is
selected. Serial Port radio button is disabled if the application does not
detect any active serial ports.
Host Enter the Ericom server host’s IP or FQDN address in the Host eld. This
eld is hidden, if the connection is through Serial Port.
Port Specify the port number used to connect the Ericom server in the Port
eld. This is available if the connection is through the network. In case of
Serial Port, this eld displays as COM port and the available serial ports
are listed in the drop-down list.
Terminal type Select the terminal type to be emulated from the drop-down list in the
Terminal Type eld.
Terminal name Type the name of the Ericom PowerTerm terminal window in the Terminal
Name eld
Script le to run on logon Specify the path of the script le (if any) to be executed in the remote
system in the Script le to run on Logon eld.
Conguring Connections locally 61