Administrator Guide
Parameter Description
server. Clear the Use Remote Desktop credentials for RD
Gateway check box and then manually enter the Username,
Password, and Domain of the RD Gateway server, if required.
NOTE: An RD Gateway server is a type of gateway that
enables authorized users to connect to remote computers
on a corporate network from any computer with an Internet
connection. An RD Gateway server enables Remote
Desktop connections to a corporate network from the
Internet without having to set up virtual private network
(VPN) connections. Ask your network administrator
whether you need to specify an RD Gateway server.
Remote Application Enter the Remote Application name.
Application Command Line Enter the command line for the program on the server.
Working Directory Enter the Working Directory for the program.
NOTE: Working Directory is applicable only for Server
Connections.
Ping Before Connect Click the ON/OFF button to enable or disable this option. If
enabled, the connection is checked before connecting to a
session.
Auto-Connect after login Click the ON/OFF button to enable or disable this option. If
enabled, the connection is automatically established after you log
in to your thin client.
Auto-reconnect after disconnect Click the ON/OFF button to enable or disable this option. If
enabled, the connection is automatically re-established after you
disconnect from the session. If the Auto-reconnect option is
enabled, you must enter the Delay duration (in seconds) when
you reconnect to the session. The default time duration is 30
seconds.
Notify when disconnected Click the ON/OFF button to enable or disable this option. It
noties when the connection is disconnected.
Network Level Authentication (NLA) Click the ON/OFF button to enable or disable this option. Enable
the Network Level Authentication (NLA), if NLA is enabled on
your remote computer. Your remote computer requires NLA user
authentication before you establish a full Remote Desktop
connection and the login screen is displayed.
Smart card login Click the ON/OFF button to enable smart card login to the thin
client. The User Name, Password, and Domain are not required.
Enable H.264 decoding Click the ON/OFF button to enable or disable this option.
Enable this option to allow H.264 decoding in Microsoft RDP
Client. The RDP client uses H.264 decoding, provided the agent
supports H.264 software encoding. If the agent does not
support H.264 software encoding, the RDP client uses
JPG/PNG decoding. Disable this option if you want to use
JPG/PNG decoding.
Enable UDP networking Click the ON/OFF button to enable or disable this option. Enable
this option to allow UDP networking in Microsoft RDP Client.
The RDP client uses UDP networking, provided UDP
connectivity is available. If the UDP networking is blocked, the
Conguring Connections locally 65