Setup Guide

Table 13. ICA connect: options (continued)
Option Description
3 – Low Quality
Autoconnect={0 to 99}
Default is 0.
Use for automatically starting a session after you sign in, if
sign-on is enabled.
The value of 0 – 99 is the delay in seconds before auto-
starting the session.
AppendUsername=1
This enhancement allows user names to display in the title bar
of an ICA session at the client side.
Browserip=list of browsers
List of IP addresses or DNS registered names to specify ICA
browsers. List items must be separated by semicolons or
commas.
Colors={256, 32k, 64k or high, 16m, true} Default is high.
Session color mode. For faster display performance, use 256
colors for the session.
● 256 is 8-bits
● 32k is 15-bits
● 64k or high is 16-bits
● 16m is 24-bits
● true is 32-bits
NOTE:
● 64k is the same value as high.
● 16m — 24-bits over ICA is only supported by Windows
XP and Windows 2003 server. It is not supported by
Windows Server 2008 or newer.
● true — 32-bit remote connections are not supported
by Windows XP or Windows 2003 server. It requires
Windows Vista, Windows Server 2008, or newer with
ICA.
Command=start command
A string of commands to be executed after logging on to the
server. This entry is limited to 127 characters.
Description=string description
Connection description. Enclose the string description in
quotation marks if there are embedded blanks or single
quotes. For quotation marks, use common-practice nesting
rules. Maximum of 38 characters are allowed.
Directory=working directory
A directory to be used as the working directory after logging
on to the server. Maximum of 63 characters are allowed.
Disablesound={no, yes, 2} or {0, 1, 2} Default is no.
Specifies whether or not to disable remote sound upon
connection start.
Domainname={domain name,$DN}
Domain name to use in a Windows network. $DN specifies
that the thin client sign-on domain name is used. Maximum of
19 characters are allowed.
Connect Parameter: Options 101