Setup Guide

Table 13. ICA connect: options (continued)
Option Description
Encryption={None, Basic, 40, 56, 128, Login-128} Default is Basic.
Connection security encryption level. The highest level is 128-
bit security (Login-128 option is 128 bit encryption for login
only).The lowest is None.
NOTE:
The server must support the specified level of encryption
or the connection will fail.
Fullscreen={no, yes}
Default is no.
Yes/no option to run the session in full screen. If
Fullscreen=no then the session runs in a windowed screen.
Host=[name, IP, $SYS VAR]
or
Application=published application
Host — A list of server hostnames or IP addresses to which
the thin client will attempt to connect. The next server on the
list is attempted if the previous one failed. List items must be
separated by semicolons or commas.
NOTE:
$UN (see System Variables) specifies that the sign-on
user name is used and should be set in a {username}.ini
file. If set to Host=$UN in a {username}.ini file, the
hostname will display as the sign-on user name. If set to
Host=$UN in a wnos.ini file, the hostname will display as
the default start.
Application — Defines the published application to launch.
Application is required if no host is specified.
HttpBrowsing={no, yes}
Default is no.
Yes/no option to select an http browsing protocol. Use
HttpBrowsing=no for User Datagram Protocol (UDP).
NOTE:
This option is used to override the default method of
browsing established in the ICABrowsing parameter. For
information, see Connection Settings: wnos.ini files,
{username} INI, and $MAC INI Files.
Icon={default, bitmap file}
Specifies an icon to appear on the thin client desktop for a
connection. Use Icon=default to display a system default icon
for a connection.
To use an icon other than the default icon, enter the name
with extension of the bitmap file; ensure that the file is
located in the FTP server wnos\bitmap directory. If Icon= is
not specified and the icon is not specified by a PNAgent/
PNLite server, no icon is displayed for a connection.
KeepAlive={0 to 127}
Specifies the number of minutes to keep a session connected
after the session is inactive. During this period, one dummy
packet will be sent to the server if network traffic is lost.
Default is 10.
LocalCopy={no, yes}
Default is no.
Yes/no option to save the connection to the local NVRAM.
102 Connect Parameter: Options