Setup Guide

Table 13. ICA connect: options (continued)
Option Description
The connection description of the Description option is used
as the index key into the local connection table. If a match is
found, then the entry is updated. Otherwise, a new entry is
created.
Maximum total of local entries is 16.
Logon_mode={local-user, smartcard, user-specified} Default is local-user.
Specifies how users authenticate to the selected application
set or ICA connection.
Lowband={no, yes}
Default is no.
Yes/no option to enable optimization for low speed
connections such as reducing audio quality and/or decreasing
protocol-specific cache size.
Mapdisks={no, yes}
Default is no.
Yes/no option to auto-connect and map any connected USB
flash drive upon connection start.
Mapdisksunderz
NOTE: DISCONTINUED. DO NOT USE
.
[NO_FontSmoothing={no, yes}]
Default is no—font smoothing is enabled by default.
Yes/no option to disable font smoothing. If set to yes, the
font smoothing is disabled.
NoReducer={no, yes}
Default is no.
Yes/no option to turn off compression. Default is no, which
enables compression. To turn off compression, enter yes.
Used here is an option of the Connect statement. It sets the
value of NoReducer only for this specified connection.
NOTE:
By default the ICA protocol compresses the data to
minimize the amount of data that needs to traverse the
network. This compression can be as much as 50 percent
for text-based applications such as Microsoft Word and
40 percent less for graphics applications than the data
streams that are not compressed.
Password={password, $SYS_VAR}
Password to log-in to the application server. Either a
conventional login password or a variable can be used.
Maximum of 19 characters are allowed.
The value of password is a conventional login password.
The value of $SYS_VAR is a system variable found in Table:
System variables.
NOTE:
The application server password is not encrypted; it is
strongly recommended not to specify it. The user will be
prompted to enter the password when the connection is
made. This application server password directive never
Connect Parameter: Options 103