Setup Guide

Table 13. ICA connect: options (continued)
Option Description
Yes/no option to not auto-connect to local printers when the
connection starts.
UnmapSerials={no, yes}
Default is no.
Yes/no option to not auto-connect to local serials when the
connection starts.
UnmapUSB={no, yes}
Default is no.
Yes/no option to not auto-connect to local USB devices
(Virtual USB) when the connection starts.
Username=[username, $SYS_VAR]
Username to log-in to the application server. Either a
conventional login username or a variable can be used.
Maximum of 31 characters are allowed.
The value of username is a conventional login username.
The value of $SYS_VAR is a system variable found in System
variables.
NOTE:
The combination of all the variables such as $IP@$DN are
also supported.
Username-enc=an encrypted username Specifies an encrypted string as a username for a connection.
[WyseVDA={no, yes}]
Default is no.
Yes/no option to enable Wyse Virtual Desktop Accelerator for
all ICA sessions.
RDP connect options
Table shown here contains the supported options used for RDP connections after you use the Connect=RDP parameter/
selection.
NOTE:
If an option has an underlined value (default), that option and default value will automatically be used with Connect=RDP;
options without underlined values can also be used if you want to, but are not automatically used with Connect=RDP. In
addition, when using options, you can leave the default value or change it to another value shown.
For example, in the following case where:
Connect=RDP
[Option1={0, 1}]
[Option2={1, 2, 3, 4}]
Since you are using Connect=RDP, then Option 1 and its default value 0 will automatically be used as Option1 has an underlined
value (default of 0). You can still use Option 2 if you want to, however, Option 2 is not automatically used with the parameter as
Option 2 does not have a default (underlined) value.
NOTE:
Any option in RDP Connect Options that is used in a {username}.ini file will return to the default value set for that option in
the wnos.ini file after a user sign-off.
For example, if your {username}.ini file contains the option Reconnect=yes (so that a lost connection will restart 20 seconds
after disconnection) and you sign off of the thin client, then the Reconnect value will return to the original default value of
Connect Parameter: Options 105