Setup Guide

no (Reconnect=no) contained in the wnos.ini file—so that others who sign in can use their own user profile assuming the
administrator has not changed the default values in the wnos.ini file.
RDP connect options
Table 14. RDP connect options
Option Description
Autoconnect={0 to 99}
Default is 0.
Use for automatically starting a session after sign-on, if sign-
on is enabled.
The value of 0-99 is the delay in seconds before auto-starting
the session.
Colors={256, 32k, 64k or high, 16m, true}
Default is high.
Session color mode. For faster display performance, use 256
colors for the session.
● 256 is 8-bits
● 32k is 15-bits
● 64k or high is 16-bits
● 16m is 24-bits
● true is 32-bits
NOTE:
● 64k is the same value as high.
● 16m — 24-bits over RDP is only supported by
Windows XP and Windows 2003 server. It is not
supported by Windows Server 2008 or newer.
● true — 32-bit remote connections are not supported
by Windows XP or Windows 2003 server. It requires
Windows Vista, Windows Server 2008, or newer with
RDP.
Command=start command
A string of commands to be executed after logging on to the
server. This entry is limited to 127 characters.
Console={no, yes}
Default is no.
Yes/no option to login to a session in Console mode.
NOTE:
If Console=yes is set behind the RDP connection, the
TimeZone redirection feature will be disabled.
Description=string description
Connection description. Enclose the string description in
quotation marks if there are embedded blanks or single
quotes. For quotation marks, use common-practice nesting
rules. Maximum of 38 characters are allowed.
Directory=working directory
A directory to be used as the working directory after logging
on to the server. Maximum of 63 characters are allowed.
Disablesound={no, yes, 2} or {0, 1, 2} Default is no or Default is 0.
106 Connect Parameter: Options