Setup Guide

Table 4. General Settings: wnos.ini files only (continued)
Parameter Description
Components="display,timezone"
This INI statement allows you to customize display and
timezone settings, and these personalized settings are not
overridden by wnos.ini after the device restart.
MirrorFileServer={no, yes}
Default is no.
Yes/no option to enable the cache all server files functionality.
This enables the cache all server files such as INI files,
wallpaper, bitmap, font, local messages and so on to the local
flash when files are changed in the file server. ThinOS would
use the cached files when files on the file server are
unavailable.
NOTE: S10 is not supported
RootPath=<file server root path>
This file server root path is entered into thin client local setup
(non-volatile memory). The thin client immediately uses this
path to access files. The directory name \wnos will be
appended to the file server root path entry before use.
TerminalName=<name>
[reboot={no, yes}]
TerminalName — Name of the client comprising a 15-
character string. It can also be configured with system
variables. Basically all the variables can be used except $TN
(recursive), $UN, $PW, $DN. However, these are not yet
available when parsing wnos.ini. Additionally combinations like
xy$mac, sz$tnxyz etc are supported.
reboot — Default is no. Yes/no option to reboot the thin
client if the terminal name is changed.
TimeZone=<zone value>
[ManualOverride={no, yes}]
[daylight={
no, yes}]
[start=MMWWDD end=MMWWDD]
[TimeZoneName=<timezonename>]
[DayLightName=<daylightname>]
TimeZone — Specifies the time zone if the zone is
unspecified on the thin client or is used with ManualOverride.
Supported zone values s are listed in the System Preference
dialog box on the thin client and in TimeZone Parameter:
Values.
NOTE:
The TimeZone parameter is dependent on the
TimeServer=parameter. If a time server is not defined, the
client CMOS/BIOS internal clock will be used as a
reference.
ManualOverride — Default is no. Yes/no option to override
the thin client System Preference Menu setting with this
TimeZone setting. TimeZone settings in the wnos.ini file will
be saved into NVRAM if EnableLocal=yes is set in the wnos.ini
file.
Daylight — Default is no. Yes/no option to enable daylight
saving time; MMWWDD is a 6 digit number to specify the
start and the end of daylight saving time.
NOTE: The Start and End options are in the MMWWDD
format, where:
MM = Month of the year. Values are 01 to 12 for the
months of the year from January to December. For
example, 01 = January, 12 = December
Parameters for wnos INI files only 17