Setup Guide

Table 4. General Settings: wnos.ini files only (continued)
Parameter Description
WW = Week of the Month. Values are 01 to 05 for the
week of the month, 05 is the last week. For example, 01 =
1st week, 05 = the last week of the month.
DD = Day of the week. Values are 01 to 07 for the day in
the week from Monday to Sunday. For example, 01 =
Monday, 07 = Sunday.
NOTE:
For the 2013 year, DST dates are Sunday, March 10,
2:00am and ends Sunday, November 3, 2:00am.
TimeZoneName — Display name sent to the ICA/RDP
session such as Eastern Standard Time.
DayLightName — Display name for daylight saving time.
If daylight saving time is enabled, DayLightName should be
named something similar to Eastern Daylight Time,
otherwise it should be the same as TimeZoneName.
NOTE:
To configure daylight saving time for an RDP session, you
must enable the Allow Time Zone Redirection function.
Use the following guidelines:
1. Run gpedit.msc to open the Group Policy dialog box.
2. Click Computer Configuration in the Local Computer
Policy tree, and expand the Administrative
Templates folder.
3. Expand the Windows Components folder, and then
expand the Terminal Services folder.
4. Click Client/Server data redirection to open the
Setting list.
5. Right-click Allow Time Zone Redirection and select
Properties to open the Allow Time Zone
Redirection Properties dialog box.
6. Select the Enabled option, and then click OK.
7. Close the Group Policy dialog box.
Overall example:
TimeZone="GMT – 08:00" \
ManualOverride=yes Daylight=Yes \
Start=030107 End=110107 \
TimeZoneName="Pacific Standard Time" \
DayLightName="Pacific Daylight Time"
Peripheral settings for wnos.ini files only
The following table contains the parameters used for configuring peripheral settings such as keyboard, monitor, mouse, and
printer. The defaults values are underlined.
18
Parameters for wnos INI files only