Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
ClientCertificate —The option specifies the client certificate file name
during SSL connection between Healthcast server and client.
INACTIVE=minutes
[NoSessionTimer=minutes]
[LockTimer=seconds]
Default is 0. There is no Idle timeout. The range is 0 minutes to 480 minutes.If
the value given is bigger than 480, 480 is set instead. If the value given is
smaller than 0, 0 is set instead.
When the system idle is time out in the configured minutes, the system will
automatically sign off, reboot or shutdown which are based on the setting of
AutoSignoff.
NoSessionTimer— The parameter NoSessionTimer has the same range as
INACTIVE and it is valid only if INACTIVE value is not 0. If there is a session
use the value of Inactive, otherwise use the value of NoSessionTimer, if
NoSessionTimer is configured.
If AutoSignoff=yes Shutdown=yes is configured, then this statement can
work before signon.
If AutoSignoff=yes Reboot=yes is configured, this statement can work before
signon.
LockTimer—If the parameter LockTimer is set, the terminal is locked and the
system idle is timeout in the configured seconds; System will automatically
sign off, reboot or shutdown based on the setting of AutoSignoff.
LongApplicationName={no, yes}
Default is no.
Yes/no option to display all 38 characters in a desktop icon name. If
LongApplicationName=no, then icons will display up to 19 characters; any over
19 characters and the last three characters will be “…”.
MaxVNCD={0, 1}
[VNCD_8bits={yes,no}]
[VNCD_Zlib={yes, no}]
Default is 0.
Option to enable VNC shadowing. Default value is 0 means VNC shadowing is
disabled. Set to 1 to enable shadowing.
NOTE:
Only one VNC client session is allowed and a password is required.
See also VNCPrompt in Connection Settings: wnos.ini files, {username} INI,
and $MAC INI Files to enable a VNC shadowing prompt to a user.
See also VncPassword in Connection Settings: wnos.ini files only to specify a
string of up to 8 characters as the password used for shadowing.
VNCD_8bits — Default is yes. Yes/no option to force the VNC server to
send out images with 8-bits-per-pixel; if set to no, the VNC server will send
out images with the current system color depth.
VNCD_Zlib — Default is no. Yes/no option to allow the VNC server to send
data with Zlib compression.
MMRConfig={VIDEO}
[flashingHW={0, 1}]
This parameter specifies whether to show the “HW” label at the top left
corner of video or not when HDX is hardware decoded. The default value is 0.
Set flashingHW to 0, if you want to hide HW. Set flashingHW to 1, if you want
to show HW.
Multifarm={no, yes}
Default is no.
Yes/no option to support Citrix multifarm functionality for the wnos.ini files. If
Multifarm=yes, PNAgent/PNLite users are able to authenticate to more than
one Citrix farm.
MultiHead=[yes, no]
[ManualOverride={yes, no}]
If you set ManualOverride=yes, the monitor layout can be set by the user
configuration if any, otherwise the configuration defined in INI are applied.
Parameters for wnos INI files only 27