Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
Set AutoAccess=RDSHD or RDSHA to automatically launch Microsoft type
broker.
Set RDSHPC to automatically launch RDP session without broker.
OneSignTimeout sets the timeout for OneSign login window. The value range
is 0 to 30 seconds. Default is 20 seconds. 0 means no timeout and the
OneSign login window stays forever.
PasswordServer=password_server
[AccountSelfService={yes, no}]
[connect={ica, rdp}]
[encryption={Basic, 40, 56, 128,
Login-128, None}]
Specify an ica/rdp server that can be used to log on to modify password
when you sign-on with password timeout.
The PasswordServer statement can specify the connection parameters as
described in the Connect statement. If no parameter is specified, it connects
with ICA protocol.
AccountSelfService — Yes/no option to define the password server as an
Account Self Service server.
If AccountSelfService=yes follows PasswordServer, click the icon on the
signon window to do account self-service.
If Connect parameters do not follow AccountSelfService=yes, this password
server will be the account self-service server of Citrix and clicking the icon
will use Citrix protocol to unlock or change password for an account.
If Connect parameters follow AccountSelfService=yes, clicking the icon
launches a session to change password for an account.
PCoIP_Logging={yes, no}
[Broker_Logging_Level={0,1,2,3,4}]
[Session_Logging_Level={0,1,2,3,4}]
The option PCoIP_Logging can enable and disable the PCoIP client logs
output in Trouble Shooting. If you set the value to yes, then it is same as
selecting the Trouble Shooting Capture Export PCoIP Log radio button to
persistent and no to none.
The option Broker_Logging_level and Session_Logging_Level accord to
PCoIP broker log level and PCoIP session log level. The default value is 0
which means critical log, 1 means log severity error, 2 means log severity
info, 3 means log severity debug, and 4 means log severity unrestrained.
PlatformConfig=all
[EncryptFS=yes]
Encrypts local flash, specifically cached INI files and credentials that are
stored, if using signon=yes.
NOTE:
Event log will display new statements stating that FileSystem encryption
has been enabled.
PlatformConfig=D/DQ/U/T Class
[Firmware={Firmware filename}]
[BIOS={BIOS filename}]
If a specific platform is specified by the PlatformConfig parameter, ThinOS
attempts to load the Firmware and BIOS for the specified platforms by the
Firmware and BIOS parameters.
If the Firmware and BIOS are valid on file server, they are loaded by default. If
the Firmware and BIOS are invalid on file server, ThinOS uploads the platform
with default Firmware and BIOS instead.
ThinOS searches the file server for the exact firmware name. If the defined
firmware name is not found, then the default is applied and ThinOS searches
for DOVE_boot firmware.
Proxy={yes, no}
AppList={ccm;fr;rtme;wms}
[Type={Global, http, https, socks5}]
[Server=_host_port_]
[User=_user_name]
Specifies the proxy settings which are saved in non-volatile memory. If
Proxy=no, all proxy settings are cleared and all the followed options are
ignored.
If Proxy=yes, the option AppList must be followed. It specifies which
applications are applied to connect through proxy. WMS, CCM, FR, and
RTME are supported. The application name is separated with semicolon.
30 Parameters for wnos INI files only