Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
to specify the corresponding SCEP admin web page's URL. If neither
EnrollPwd nor EnrollPwdEnc is set, client will try to use these set of settings
to automatically get an enrollment password and then use that password to
request a certificate. If communication security is necessary in your
environment during this phase, please add https:// as the prefix for
ScepAdminUrl to use HTTPS instead of the default HTTP protocol.
Use ScepAutoEnroll=no AutoRenew=yes to only enable SCEP auto renew; all
other parameters are not needed if ScepAutoEnroll is set to no.
NOTE: SCEP server’s URL must be an HTTP or HTTPS link. Do not add
protocol prefix to RequestURL and ScepAdminURL.
SelectServerList={PNA, VDI}
[Default=default_desc]
list of servers {Server1; Server2; ...ServerN}
Allows users to select one PNA or VDI server during logon. For server use the
format:
description = <server’s description> host = <server’s url> [ <options>]
NOTE: There must be “description” and “host” key words on each server.
For PNA server options, use the options of the PnliteServer parameter in
Connection Settings: wnos.ini files, {username} INI, and $MAC INI Files.
PNA example:
SelectServerList=PNA Default=test3 description =
test1 host = 192.168.0.10 autoconnectlist
=* reconnectfrombutton=0 description = test2 host =
HostName2.wyse.com TimeOut=200 descriprion = test3 host
= https://server3.wyse.com
For a VDI server: If you want to use a VDI broker, specify ConnectionBroker
in wnos.ini. Otherwise the VDI broker’s type is default.
VDI example:
ConnectionBroker=vmware
SelectServerList=VDI \
Default=test5 \
description=test4 host=192.18.0.11 \
description=test6 host=host2
The Default option following "SelectServerList={PNA, VDI}" can specify the
default server. The value is one of server description defined after that. After
one selects another server and sign off, this default server is selected. If
default option is not specified, the last selected server is selected in the next
sign on.
Service={snmpd, thinprint, vncd
vda <port number>} disable={no, yes}
Service — Specifies the services you can enable or disable; there are
different syntaxes for the different services.
disable — Default is no. Yes/no option to disable the services. Disable must
follow the Service parameter.
Service=snmpd disable={no, yes}
[community=<snmp_community>
[encrypt={yes, no}]]
[communityReadOnly=<snmp_community_rea
d_only> [encrypt={yes, no}]]
[servers=server_list]
Default is no.
Service=snmpd disable — Yes/no option to disable the snmpd service.
community — The option community is same as the statement Community.
encrypt option is same as that in the statement community.
communityReadOnly— This option is to set community only has snmp get
and get_next privileges. The following encrypt option is only for indicating, if
value of communityReadOnly is encrypted.
Parameters for wnos INI files only 33