Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
[SignonStatusColor=“rrr ggg bbb”]
[SCHidePINLeft={yes, no}]
[BitmapsMap={yes,no}]
[EnableMessage={yes, no}]
The size of username/domain is limited to 32 characters, and if larger than
32, it will first be truncated and then saved into NVRAM.
DefaultINI — The optional DefaultINI configures a file name which is in the
default folder of the username ini files. If the {username}.ini is not found, this
file will be loaded as default.
IconGroupStyle — The optional IconGroupStyle configures the icon group
style on the desktop. PNAgent published applications can be configured with
the client folder in the PNA server.
If set IconGroupStyle=folder, the PNAgent published applications which are
specified to display on the desktop will display with the folder.
After clicking the folder icon, the subfolder or applications in this folder will
display on the desktop. In this case, there is an Up to 1 Level icon on top.
Clicking the icon will display the up one level folder contents.
IconGroupLayout — Default is vertical. Configures the direction of the
icongroup on the desktop.
PasswordVariables — Default is no. Yes/no option to support variable
mapping ($TN, $UN etc) for a password.
Continued from the previous table...
LockTerminal — Default is yes. Yes/no option to lock the terminal. If set
LockTerminal=no, the function of locking terminal is disabled. It disables the
Lock Terminal from a Right Click on the desktop or from clicking the
Shutdown option > Lock Terminal. It also disables lock terminal even if set
ScreenSaver=minutes; LockTerminal=yes.
ExpireTime — Specifies the signon expiration time. The range is 0 to 480
minutes. The default is 0 which means no expiration.
If the value is larger than 480, then 480 is set instead. If the value is smaller
than 0, then 0 is set instead.
After system signon or starting a connection, the expiration time starts
counting. Once the expiration time is reached, starting a connection by
clicking the icon, menu or connection manager, will bring up a pop up
message box to enter the password. Only if the password is same as the
original signon password, the session starts.
If the terminal is locked and unlocked with the password, the signon
expiration time starts counting again.
UnlockRefresh — Default is yes. Yes/no option to specifies the refresh
action after unlocking the system in classic mode.
Yes — While unlocking, the system will refresh the PNA list to verify the
password.
No — Disables refresh.
SCShowCNName — Default is yes. Yes/no option to force the use of the
CN name of the certificate as the user name when using smartcard signon.
The default uses the UPN name as the user name.
SCSecurePINEntry — Default is no. Yes/no option to enable Secure PIN
entry function for pkcs15 smart card with Cherry keyboard.
AutoConnectTimeout— Default is 30 seconds.
This option sets the timeout for auto connect published application. The
range is 10 seconds to 300 seconds.
DisableEditDomain— The optional keyword DisableEditDomain, is set to yes
to stop typing in the domain box manually. Typing the character @ or \ as in
36
Parameters for wnos INI files only