Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
the format domain\user and user@domain in the username box are not
allowed.
AdGroupPreFix— The option AdGroupPreFix is only valid, when you
configure SignOn=NTLM. If the option is configured, then the thin client
verifies the names of all AD groups to which a sign-on user belongs, to get
the first group name so that its prefix matches adgrpnameprefix, and load
adgroup/"the_whole_ad_group_name".ini, if the configuration file exists,
before loading the user specific INI.
For example, if the sign on user is user_111 in a domain, and the user_111
belongs to group domain user and group tc_grp1_ad, the option is configured
as AdGroupPrefix=tc_grp1. If the configuration file adgroup/tc_grp1_ad.ini is
available, it will be loaded.
ClearUser—The option keyword ClearUser, if set to yes, clears the username
when login fails, and if set to no, retains username that is entered after login
failure. The default value is no.
DisableSignoff—The option keyword DisableSignoff, if set to yes, disables
signoff button from shutdown and connection manager window. Also this
parameter disables the logoff button on StoreFront desktop.
SFZeroButtons—The option keyword SFZeroButtons. if set to yes, displays
the buttons (shutdown, login and so on) at the bottom of signon window,
such as Zero mode when set StoreFront style.
SignonStatusColor—This option specifies the signon status and the
unlocking status text color respectively in RGB string format. The decimal
numbers rrr, ggg, and bbb are in the range of 0–255. By default, the status
text color is light red (255 60 60) for ThinOS lite and gray for ThinOS.
The SCHidePINLeft parameter enables you to hide or display the number of
attempts remaining to enter a correct PIN for the smart card. The default
value is no.
[BitmapsMap={yes,no}]—When the value is set to yes, this parameter
enables the mapping of built-in bitmaps to customized bitmaps.
You should set the value MirrorFileServer=yes when enabling bitmaps
mapping so that the mapping files are loaded from the local drive while
rebooting.
The text file name is bitmaps.map and is similar to PrinterMap file.
Each line in the file is of format "built-in bitmap file name" = "customized
bitmap files". For example: m_pcoip.ico=1-1_16.png pcoip.ico=1-1_32.png
vdm.png=3_355x85.png horizon_wallpaper.jpg=Bugatti-Veyron-Wallpaper-
Hd-1080p-uSa4W-1366x768.jpg
If the bitmaps are mapped for the first time, it is recommended to reboot the
system manually so that the files are loaded accurately.
[EnableMessage={yes, no}]—Default is yes. This parameter is used to
display the warning message on the signon window based on the file server
path. A warning message is displayed on top of the signon window when the
FTP/HTTP is configured on the file server path. This parameter also
addresses the vulnerability issue—PSRC–12979.
Speedbrowser={
on, off}
Default is on.
On/off option to enable the ICA Speed screen Browser Acceleration Function.
Sleep=[yes, no]
[program=[Sleep, Power off]]
[timer=[0, 1, 5, 10, 15, 30, 60, 120, 300, 600]
Sleep—This parameter enables or disables the sleep mode feature. The sleep
mode enables the thin client to enter the power-saving state and quickly
resumes full power operations without loss of data. The default value is yes.
Parameters for wnos INI files only 37