Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
[MaxSleepPeriod]=[0-255]] Program—This parameter specifies whether the thin client must enter the
sleep mode or power off after the screen is turned off by screen saver. The
default value is Sleep.
Timer— This parameter specifies the time in minutes to either enter the
sleep mode or shut down the client after the screen saver starts. The default
value is 10 minutes.
MaxSleepPeriod—This parameter specifies the maximum time period the
thin client is allowed to be in sleep mode. The thin client reboots after
resuming from sleep mode. If you set the value as 0, the thin client resumes
from sleep mode without rebooting.
Primary unit is day, and the current unit is hour. The default value is set to
one hour, and its range is 0 to 255.
SwitchApplication
NOTE: DISCONTINUED. DO NOT USE.
SysMode={classic, vdi, VMware, Citrix}
[toolbardisable={no, yes}]
[toolbardisablemouse={
no, yes}]
[toolbarclick={no, yes}]
[toolbardelay={0-4}]
[toolbar_no_conmgr={no, yes}]
[toolbar_no_minimizeall={
no, yes}]
[toolbardisablehotkey={no, yes}]
[ToolbarEnableOneSession={no, yes}]
[ToolbarAutoQuit={
yes, no}]
[ToolbarStay={1~20}]
[EnableLogonMainMenu={no, yes}}
[HorizonIsClassic=[yes, no]]
SysMode — Specifies the Zero interface optimized for VDI or the Classic
interface. This value will be remembered across reboots until changed. If not
defined and an INI is present, Classic mode is the default. If no INI is present,
VDI mode is the default.
Classic mode has full taskbar, desktop and connection manager and is
recommended for a terminal server environment and for backward
compatibility with WTOS 6.x.
VDI mode (Zero interface) has a new launchpad-style interface optimized for
full-screen sessions that is Desktops. Everything you need is accessed
through an always available overlay interface.
VMware mode looks similar to VDI mode but only allows VMware horizon
broker. Login window and wallpaper is specific to horizon.
Citrix mode makes the client turn to Xenith. Xen.ini is prefered in the next
reboot.
NOTE: VMware mode and Citrix mode can only be used under wnos.ini.
ZeroTheme is the alias for SysMode. You can also use ZeroTheme=xxx in
wnos.ini.
The following options allow you to configure only when the Zero toolbar
displays under VDI mode:
Toolbardisable — Default is no. Yes/no option to disable the Zero toolbar
from displaying; if set to yes, this option overrules other toolbar display
options.
Toolbardisablemouse — Default is no. Yes/no option to disable the Zero
toolbar from automatically displaying once you pause the mouse pointer on
the left side of the screen for a specified amount of time.
toolbarclick — Default is no. Yes/no option to pop up the toolbar only if
clicking on the left-most side of the screen.
toolbardelay — Specifies the seconds to delay before displaying the toolbar
after pausing the mouse pointer on the left-most side of the screen. The
value 0 will have no delay. The other values 1, 2, 3,4 will delay 0.5, 1, 1.5 and 2
seconds respectively.
toolbar_no_conmgr — Default is no. Yes/no option to hide the Home
button.
toolbar_no_minimizeall — Default is no. Yes/no option to hide the Home
button thus affecting the ability to minimize displayed list of connections.
38
Parameters for wnos INI files only