Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
toolbardisablehotkey — Default is no. Yes/no option to disable the CTR
+ALT+UP ARROW keyboard shortcut that allows the toolbar to instantly
display without a timer.
ToolbarEnableOneSession — Default is no. Yes/no option to enable the
toolbar when only one session is available.
ToolbarAutoQuit — Default is yes. ToolbarAutoQuit=no prevents the sub-
window from being closed. The toolbar will auto-hide after a certain amount
of time after user pause the mouse pointer away from the toolbar.
ToolbarStay — ToolbarStay={1~20} controls the auto-hide duration, 0.5s
per value. Thus if ToolbarStay=1, the Toolbar will auto-hide after 0.5 second;
If ToolbarStay=10, the Toolbar will auto-hide after 5 seconds.
EnableLogonMainMenu — Default is no. Yes/no option to enable the main
menu if you click the mouse button on the desktop prior to logon in Zero
mode.
[HorizonIsClassic=[yes, no]]—When the value is set to
HorizonIsClassic=yes, this parameter enables the VMware mode to be
displayed in the classic mode.
SysName
NOTE: DISCONTINUED. DO NOT USE.
TcpTimeOut={1 , 2}
Default is 1.
Specifies the timeout value of a TCP connection. The number of 30 seconds
for the timeout value of a TCP connection. The value must be 1 or 2 which
means the connection timeout value is from 1x30= 30 seconds to 2x30= 60
seconds.
Values of 3-255 are recognized only for backwards compatibility that is >2 =
60 seconds, however, these values should not be used and the value should
be set to 2.
VncPassword=<password>
[encrypt={no, yes}]
VncPassword — Specifies a string of up to 8 characters as the password
used for shadowing.
encrypt — Default is no. Yes/no option to set according to whether or not
the vncpassword you are using is encrypted.
NOTE: To use VNC Shadow, you must set MaxVNCD=1 and define a
password; The MaxVNCD default is 0 and this disables VNC. If you are
using an encrypted password, you must set encrypt to yes. For example:
VncPassword=<encoded password> encrypt=yes
If you are using a plain text password, you must set encrypt to no. For
example:
VncPassword=<plain text> encrypt=no
See also MaxVNCD in Connection Settings: wnos.ini files only to enable
VNC shadowing.
See also VNCPrompt in Connection Settings: wnos.ini files, {username}
INI, and $MAC INI Files to enable a VNC shadowing prompt to a user.
WarnUnlinkDisabled={yes, no}
Default is no.
Yes/no option to disable the pop-up warning message when a network has no
link for an ICA/ RDP session.
WINSServer=server_list
Specifies the WINS server address. The WINSserver is an IP list separated by
";" or ",", with a maximum list size of 2.
Parameters for wnos INI files only 39