Setup Guide

Table 7. General Settings: wnos.ini files, {username} INI, and $MAC INI Files (continued)
Parameter
* Global overrides identically-named user
profile
** After sign off, user profile returns to
global value
Description
The user must be signed on with a password for a Lock action to take
effect. If set in KeySequence, users can lock the thin client at any time by
pressing Ctrl+Alt+Left arrow or Ctrl+Alt+Right arrow.
Unit — This parameter converts the screen saver timer value from minutes
to hours to set longer time.
Type — Specifies which type of screensaver to use.
0 — Blank the Screen
1 — Flying Bubbles
2 — Moving Image
3 — Showing Pictures
4 — Playing Video
If the value is set to Type=None, and the parameter LockTerminal is set to
a non-zero value, the unlocking window is displayed when the screen saver
times out.
Continued from the previous table...
VideoLink — Specifies the video link address of the video file. Links with only
http are supported. The mp4 video format is supported.
VideoSpan — Specifies the video displayed mode in the screen. If the dual
head is in span mode and VideoSpan=yes, it is spanned across all the screens.
If VideoSpan=no, it is displayed in the main screen.
Imagefile — This is an optional parameter and specifies an image file residing
in the bitmap sub-folder under the home folder to be used as a Moving
Image screensaver.
If Type is set to 2 and no image file is present then the default Dell Wyse logo
is used.
If Type is set to 3, pictures residing in picture subfolder under the home
folder are displayed.
If SelectGroup=yes, then the pictures residing in the picture subfolder
under the group folder are displayed. For example, /wnos/ini/
{group_dir}/picture
If group pictures do not exist, global pictures are used. Supported formats
include JPG, GIF, PNG and BMP.
PictureTimer — Specifies the interval to wait in seconds to display another
picture. Default value is 6 seconds.
PictureOrder — Specifies the order of picture files to display. The default
is to use the order of sort from A to Z. If set to random, pictures are
displayed randomly.
PictureCheck — Specifies whether to check for picture files servers or not.
NOTE:
If set to always, the picture files in file servers are checked when the
screen saver starts every time. By default, the system checks for picture
files only when the screen saver starts for the first time to decrease
network traffic.
58 Parameters for wnos INI, {username} INI, and $MAC INI files