Setup Guide

Table 7. General Settings: wnos.ini files, {username} INI, and $MAC INI Files (continued)
Parameter
* Global overrides identically-named user
profile
** After sign off, user profile returns to
global value
Description
[Retry=number]-When the value is greater than 0, this parameter reads the
time server for retry times. If it is to set to less or equal to 0, it reads only
once.
WakeOnLAN={yes, no}
Default is yes.
Wake-on-LAN allows a thin client to be turned on or woken up by a network
message.
If WakeOnLAN=yes, ThinOS will respond for the Wake-On-LAN packet for a
remote wake up.
If WakeOnLAN=no, ThinOS will not respond for the Wake-On-LAN packet.
NOTE:
To use the WakeOnLAN parameter with a C10LE, the C10LE must use
BIOS version 1.0B_SPC001 or later.
WakeOnUSB={yes, no}
Wake on USB—This feature enables or disables a thin client to wake up from
a suspended state using a USB drive. Ensure that you connect the USB drive
to the root hub to use the Wake-on-USB feature.
Peripheral settings for wnos.ini files, {username} INI,
and $MAC INI files
The following table contains the parameters used for configuring peripheral settings such as keyboard, monitor, mouse, printers
and bluetooth devices. The underlined values are default values.
Table 8. Peripheral Settings for wnos.ini Files, {username} INI, and $MAC INI files
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
BatteryScreenSaver={0}
This option disables screen saver only for Battery Mode. This
parameter is applicable for Wyse 5470 Thin Client.
DefaultPrinter={LPD1, LPD2, LPD3, LPD4, COM1, COM2,
LPT1, LPT2, SMB1, SMB2, SMB3, SMB4}
Specifies the default printer. Be sure the printer set as
default is enabled or the setting will be invalid.
Device=audio
volume={low, middle, high} or {0 to 25}
mute={
0, 1, 2, 3}
[mic_vol={high, middle, low} or {0-25}]
[mic_mute={yes, no}]
[mic_boost={yes, no, 1, 2, 3, 4}]
[min_cache={
1-50}]
[EnableSpeaker={yes, no}][
[playback={device name string}]
Specifies the local thin client audio volume.
volume — Default is middle. Specifies the volume level.
high — maximum volume
middle — medium volume
low — minimum volume
Values of 0-25 provide more exact volume level
mute — Default is 0. Option to enable/disable mute.
0 — no mute
1 — mutes audio
60 Parameters for wnos INI, {username} INI, and $MAC INI files