Setup Guide

Table 8. Peripheral Settings for wnos.ini Files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
If set to Yes, then the registered port follows the following
binding policy: LPT1 from USB ports 1/3/5/7 and LPT2 from
USB posts 2/4/6.
If set to No, then the LPT port plugged in first is LPT1
followed by LPT2, and so on.
MicBoost={no, yes}
Default is no.
Yes/no option to enable on-board microphone boost.
**MouseNewSpeed={1-9}
Default is 6.
Value specifies the mouse speed within a range of 1 through 9,
where 1 is slowest and 9 is fastest. This parameter is the
replacement of MouseSpeed from build 7.0.1_07.
**MouseSwap={0, 1}
0/1 option to swap the mouse buttons. For example, for left-
handed use.
0 — No
1 — Yes
NetworkPrinter=host/queue
[PrinterID=Window driver name]
[Enabled={no,
yes}]
NetworkPrinter — Specifies the configuration for the
network (LPD) printer in the same way as described for the
Printer Setup dialog box in the Dell Wyse ThinOS
Administrator’s Guide. The host and queue parameters define
the IP address and queue name of the printer.
PrinterID — Specifies the Windows printer driver name.
Enabled — Default is yes. Yes/no option to enable the
network (LPD) printer.
Printer={COM1, COM2, LPT1, LPT2}
[Name=<name>]
[PrinterID=window_driver]
[Class=classname]
[Enabled={no,
yes}]
[EnableLPD={no, yes}]
Default is COM1.
Printer — Specifies the local printer to configure.
Name — Specifies the name of the printer. This option
must be used.
PrinterID — If not specified, the default Generic/Text Only is
used.
Class — Used in ThinPrint print for TPAutoconnect; the
ThinPrint technology of mapping the printer from the client
side. It can group printers to use the same template on the
ThinPrint server side. The strings PCL5, PS, and TXT are pre-
defined classes. Class can be a string with 7 characters.
Enabled — Default is yes. Yes/no option to enable the
printer.
EnableLPD — Default is no. Yes/no option to enable the LPD
service.
NOTE: The parameters must be specified in the order
shown.
Printer={LPD1, LPD2, LPD3, LPD4, LPD5-LPD36}
[LocalName=name]
[Host= host]
Default is LPD1.
Printer — Specifies the LPD printer to configure.
Parameters for wnos INI, {username} INI, and $MAC INI files 67