Setup Guide

Table 8. Peripheral Settings for wnos.ini Files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
[Queue=queue]
[PrinterID=window_driver]
[Class=classname]
[Enabled={no,
yes}]
LocalName — Specifies the name of the printer. If
LocalName is not specified, the Queue name is used.
Host — Specifies the host name of the printer.
Queue — Specifies the queue name of the printer.
PrinterID — Specifies the windows driver to use for the
printer. If not specified, the default Generic/Text Only is used.
Class — Used in ThinPrint print for TPAutoconnect; the
ThinPrint technology of mapping the printer from the client
side. It can group printers to use the same template on the
ThinPrint server side. The strings PCL5, PS, and TXT are pre-
defined classes. Class can be a string with 7 characters.
Enabled — Default is yes. Yes/no option to enable the
printer. These settings in a wnos.ini file will be saved into
NVRAM if EnableLocal=yes is set in the wnos.ini file.
NOTE:
The parameters must be specified in the order shown. For
backward compatibility, LPD is accepted as LPD1.
LPD2 – LPD4 are new in the 5.1. For WT1200 platform where
Local flash is absent, locally configured LPD2-LPD4 and SMB1
to SMB4 disappear on power cycle.
Printer={
SMB1, SMB2, SMB3, SMB4}
[LocalName=name]
[Host=\[domain]\host]
[Name=share_name]
[PrinterID=window_driver]
[Class=classname]
[Enabled={no,
yes}]
[EnableLPD={no, yes}]
[Username=username]
[Password=password]
[Domain=domain name]
Default is SMB1.
Printer — Specifies the shared Microsoft network printer to
configure.
LocalName — Specifies the name of the shared printer.
Host — Specifies the host name of the shared printer
specified as \domain\host when the host is configured within
a Microsoft domain, otherwise, host can be specified as \
\host.
Name — Specifies the shared name of the shared printer.
PrinterID — Specifies the windows driver to use for the
printer. If not specified, the default Generic/Text Only is used.
Class — Used in ThinPrint print for TPAutoconnect; the
ThinPrint technology of mapping the printer from the client
side. It can group printers to use the same template on the
ThinPrint server side. The strings PCL5, PS, and TXT are pre-
defined classes. Class can be a string with 7 characters.
Enabled — Default is yes . Yes/no option to enable the
printer.
EnableLPD — Default is no. Yes/no option to enable the LPD
printer.
Username — Specifies the username of a user who can use
the SMB printer.
Password — Specifies the password of a user who can use
the SMB printer.
Domain — Specifies the domain name of the SMB printer.
68
Parameters for wnos INI, {username} INI, and $MAC INI files