Setup Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
domain. If CAGAuthMethod=LDAP, no passcode field is
needed.
● CAGAuthMethod={LDAP+RSA, RSA+LDAP} — Used for
CAG authentication configuration.
● If CAGAuthMethod = LDAP+RSA, an extra passcode field
needs to be input except username/password/domain. If
the CAG server is configured for a double authentication
policy, this ini corresponds to the first auth LDAP and
second auth RSA.
● If CAGAuthMethod = RSA+LDAP, it has the same result
with CAGAuthMethod = RSA, compared to LDAP+RSA. If
CAG server configure double authentication policy, this ini
correspond to First auth RSA and Second auth LDAP.
RequestIconDataCount — RequestIconDataCount is used
for requesting 32-bit color icons. It is a counter which means
that only the count of the icons will be requested. The default
number is 10.
For example, if set RequestIconDataCount=0, no icon data will
be requested. If set RequestIconDataCount=5, only 5 icons
are requested.
DefaultSettings — Specifies the default settings for XenApp
or XenDesktop.
Xen App Default Settings:
1. SignOn=Yes
2. PnliteServer= RequestIconDataCount=20
3. desktopcolordepth=32
4. LongApplicationName=yes
5. sessionconfig=ica progressivedisplay=yes ondesktop=yes
6. device=audio volume=high
7. Seamless=yes FullscreenReserved=yes
8. sessionconfig=all mapdisks=yes
9. Enabled by default: Disks, Serials, Sound
10. Disabled by default: USB, Printers, Smart Cards
Xen Desktop Default Settings:
1. SignOn=Yes
2. sysmode=vdi toolbarclick=yes toolbardelay=3
3. sessionconfig=ica progressivedisplay=yes
4. PnliteServer=
5. AutoSignoff=yes
6. Enable by default: Printers, Serials, USB, Sound
7. Disabled by default: Disk, Smart Cards
Continued from the previous table...
84 Parameters for wnos INI, {username} INI, and $MAC INI files