Setup Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
SecureMatrixServer=<SecureMatrix Server
Host name or IP address/FQDN or URL>
[EnableSelectTable]
Specifies the Host name or IP address/FQDN or URL of the
Secure Matrix server. Http or https protocol usage is decided
by the server configuration. If SecureMatrixServer is defined,
the user must pass authentication with the Secure Matrix
server first, and then there is a seamless log in to the brokers
if the server can provide the correct broker credentials, if not,
the user must enter broker credentials to log in.
For Example: SecureMatrixServer=https://gsb01.bjqa.com
NOTE:
Before using this parameter, use the Secure Matrix
documentation to set up the Matrix Server. Also, be sure
you import the relevant GSB Server Certificate file when
using https.
EnableSelectTable enables you to select the table type (3 or 4
tabs) when you change the password (SMXBridge server 3.9
start supports this feature). Default value is No.
SelectGroup={
no, yes}
[Default=default_desc]
description=group1
[groupname=name1]
[description=group2]
[groupname=name2]
Default is no.
SelectGroup — Yes/no option to allow a user to select from
a group list on the Log on dialog box during a log in. If yes, the
description will display in the group list box.
groupname — The group name is used to identify the group
including the directory and file name. If not defined, the
description will become the group name.
The Default option following "SelectGroup=yes" can specify
the default group. The value is one of group description
defined after that. After you select another group and sign
off, this default group will be selected.
If default option is not specified, the last selected group will
be selected in the next sign on.
For example:
SelectGroup=yes \
default="Sus team" \
description="Dev team" groupname=dev \
description="Sus team" \
description="SQA team" groupname=sqa \
description="guest"
Group 1: Description="Dev team" groupname=dev
The file \wnos\ini\dev\dev.ini must be created in the file
server. In the dev.ini, the broker, domain list, or connections
can be defined for the dev team.
Group 2: .Description="Sus team"
The file \wnos\ini\Sus team\Sus team.ini must be created in
the file server. In the Sus team.ini, the broker, broker list, or
connections can be defined for the Sus team.
Group3...4...n...and so on.
After a user selects a group, the system will load the group ini
file first, and then load the \wnos\ini\{group_name}
Parameters for wnos INI, {username} INI, and $MAC INI files
87