Users Guide

● You can add the same network image path with different file transfer protocols, such as FTP, HTTP, HTTPS, or
CIFS.
● On the Image Push screen, the information entered in the local image fields are retained when you switch to the
Network tab.
● On the Image Push screen, the information entered in the network image fields are retained when you switch to the
Local tab.
● On the Image Push screen, the information entered in the local and network image fields are not retained when you
switch to Image Pull, Image Push, Clone, or Settings tabs.
7. Click Configure USB Drive.
8. Select any one of the following options:
● Update (Recommended)—Select this option to add or delete images to an existing configured USB drive.
● Format and Update—Select this option if your USB drive is corrupted or not configured. This option backs up contents,
initialize the drive, and add or delete the selected image.
The status is displayed in the progress bar.
Figure 16. Pushing image to the device
USB Imaging Tool formats the USB drive, copies the necessary files based on the selected OS architecture, and completes
the configuration of USB drive for the image pull operation.
Pushing a network image to a target device
Prerequisites
Before you begin the push operation, do the following:
Using Dell Wyse USB Imaging Tool
23