Service Manual

System Setup Options
NOTE: Depending on your computer and installed devices, the items listed in this section may not appear, or may not appear exactly as listed.

System
Processor Info
Identifies the processor type, clock speed, bus
speed, L2 cache, ID, and whether the processor is
multiple core capable, supports Hyper-Threading and
supports 64-bit technology.
Memory Info
Identifies the memory type, speed, and channel
mode (dual or single) by DIMM slot location.
PCI Info
Indicates the expansion card type by slot location.
Date/Time
Displays current date and time settings.
Boot Sequence
The computer attempts to boot from the sequence of
devices specified in this list.

NOTE: If you insert a boot device and restart the
computer, this option appears in the system setup
menu. To boot from a USB memory device, for
example, select the USB device and move it so that it
becomes the first device in the boot sequence.

Drives
Diskette Drive
(Internal default)
Enables and disables the floppy drive attached to the
DSKT connector on the system board and sets read
permissions for the drive.
l Off — All floppy drives are disabled.
l USB — USB floppy drives are enabled
l Internal — The integrated floppy drive is
enabled.
l Read Only — The integrated floppy drive is
enabled with read-only access.

NOTE: Operating systems with USB support will
recognize USB floppy drives regardless of this setting.
SATA Drives 0 through 5
(On default)
Enables or disables drives attached to the SATA
connectors on the system board.
l Off — A device attached to the interface is not
usable.
l On — A device attached to the interface is
usable.
l RAID On - A device attached to the interface
is configured for RAID (see "About Your RAID
Configuration" in your Owner's Manual).
PATA Drives 0 through 1
(On default)
Enables or disables drives attached to the ATA
connectors on the system board, and lists the
controller details.
l Off — A device attached to the interface is not
usable.
l On — A device attached to the interface is
usable.
SMART Reporting
(Off default)
Determines whether hard-drive errors for internal
drives are reported during system startup.
l Off — Errors are not reported.
l On — Errors are reported.

Onboard Devices
Integrated NIC
(On default)
Enables or disables the integrated network interface
controller (NIC).
l Off — The integrated NIC is disabled.
l On — The integrated NIC is enabled.
l On w/PXE — The integrated NIC is on (with
PXE enabled).