Service Manual


NOTE: This feature does not work if you turn off your
computer using a power strip or surge protector.
Auto Power Time
Specifies the time to automatically turn on the
computer.
Change the time to automatically turn on the
computer by pressing the up- or down-arrow key to
increase or decrease the numbers, or type the
numbers in the appropriate time field.

NOTE: This feature does not work if you turn off your
computer using a power strip or surge protector.
Suspend Mode
(S3 default)
Specifies the power management suspend mode.
l S1 — The computer resumes more quickly from
sleep mode.
l S3 — The computer conserves more power
when not in use (system memory remains
active).

Maintenance
Service Tag
Displays the system service tag.
Load Defaults
This setting restores the computer's factory-installed
default settings.
l Cancel — Do not restore factory-installed
default settings.
l Continue — Restore factory-installed default
settings.
Event Log
Displays the system event log.
l Mark all entries — Mark all event log entries
as read (R).
l Clear log — Clear all event log entries.

NOTE: Once an event log entry is marked as read (R)
that entry cannot be marked as unread (U).

POST Behavior
Fastboot
(On default)
Enables or disables the option to speed up the boot
process by skipping some compatibility tests.
l Off — Do not skip any steps in the boot
process.
l On — Boot quickly.
Numlock Key
(On default)
Enables or disables the numerical and mathematical
features of the rightmost bank of keys on the
keyboard.
l Off — Right keypad keys function as arrows.
l On — Right keypad keys function as numbers.
POST Hotkeys
(Setup & Boot Menu default)
Specifies the function keys to display on the screen
when the computer starts.
l Setup & Boot Menu — Display both messages
(F2=Setup and F12=Boot Menu).
l Setup — Display the setup message only
(F2=Setup).
l Boot Menu — Display the Quickboot message
only (F12=Boot Menu).
l None — Neither message is displayed.
Keyboard Errors
(Report default)
Enables or disables keyboard error reporting when
the computer starts.
l Report — Display any keyboard errors.
l Do not report — Do not display any keyboard
errors.