Service Manual

Back to Contents Page
 Internal Card With Bluetooth Wireless Technology
Dell™XPS™M2010ServiceManual
Removing the Internal Card with Bluetooth Wireless Technology
Replacing the Internal Card with Bluetooth Wireless Technology

Removing the Internal Card with Bluetooth Wireless Technology

1. Follow the instructions in Before Working Inside Your Computer, including removing the system battery.

2. With the computer still turned over, remove the subwoofer cover (see Removing the Subwoofer).

3. The internal card with Bluetooth wireless technology is adhered to the subwoofer. To remove the card, pry it off the subwoofer, and disconnect the
cable attached to the card.
Replacing the Internal Card with Bluetooth Wireless Technology

1. Connect the cable to the new internal card with Bluetooth wireless technology.

2. Adhere the new internal card with Bluetooth wireless technology to the subwoofer.

3. Replace the subwoofer cover (see Replacing the Subwoofer).

4. Replace the system battery (see Replacing the System Battery).
Back to Contents Page

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface. If you leave the area, ground yourself again when you return
to the computer.
NOTICE: To help prevent damage to the system board, remove the main battery before working inside the computer.
1
subwoofer
2
internal card with Bluetooth wireless
technology
3
cable connected to the
internal card
NOTE: The internal card with Bluetooth wireless technology is adhered to the subwoofer. To replace the card, you will need to pry it from the subwoofer
and adhere a new card.