Service Manual

Replacing a Mini Card



1. Align the card with the system board connector at a 45-degree angle, and press down to insert the card into the connector.



2. Connect the antenna cables to the antenna connectors on the mini card. Connect the white cable to the connector with the white arrow, and connect

the black cable to the connector with the black arrow.



3. Replace the memory module cover (see Replacing the Memory Module).



4. Replace the system battery (see Replacing the System Battery).

Back to Contents Page



NOTICE: To avoid damaging the card, ensure that the antenna cable is not under the card when you click the card into place.

NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.

NOTE: If your computer has a gray cable, connect it to the connector with the gray arrow if one is available on your card.

white arrow

black arrow

antenna cables

mini card

