Service Manual

Back to Contents Page
Coin-Cell Battery
Dell™XPS™M2010ServiceManual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
Removing the Coin-Cell Battery
1. Follow the instructions in Before Working Inside Your Computer, including removing the system battery.
2. With the computer still turned over, remove the memory module cover (see Removing the Memory Module Cover).
3. Use a small plastic scribe to carefully lift one side of the battery out of the compartment.
4. Lift the battery out of the battery compartment.
Replacing the Coin-Cell Battery
1. With the positive side up, insert an edge of the coin-cell battery under the lip of the compartment.
2. Carefully press the coin-cell battery into the compartment, being careful not to break the plastic.
3. Replace the memory module cover (see Removing the Memory Module Cover).
4. Replace the system battery (see Replacing the System Battery).
Back to Contents Page
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface. If you leave the area, ground yourself again when you return
to the computer.
NOTICE: To help prevent damage to the system board, remove the main battery before working inside the computer.
1
small plastic scribe
2
coin-cell battery
3
battery compartment