Service Manual

Removing the Drive Panel

1. Follow the procedures in Before You Begin.

2. Remove the computer cover (see Removing the Computer Cover).

3. Grasp the drive-release latch and slide it towards the base of the computer until the drive panel snaps open.

4. Pivot the drive panel outward and lift it from its side hinges.

5. Set the drive panel aside in a secure location.

Installing the Drive Panel

1. Follow the procedures in Before You Begin.

2. Remove the computer cover (see Removing the Computer Cover).

3. Align the drive panel tabs with the side-door hinges.

4. Rotate the drive panel toward the computer until it snaps into place on the drive panel.

5. Replace the computer cover (see Replacing the Computer Cover).
1
drive-release latch
2
drive panel
3
drive-panel tabs
1
drive-release latch
2
drive panel
3
drive-panel tabs