Service Manual


6. Replace the drive panel (see Installing the Drive Panel).

7. Replace the computer cover (see Replacing the Computer Cover).

8. Connect your computer and devices to electrical outlets, and then turn them on.

Installing a Media Card Reader

1. Follow the procedures in Before You Begin.

2. Remove the computer cover (see Removing the Computer Cover).

3. Remove the drive panel (see Removing the Drive Panel).

4. Remove the existing media card reader, if applicable (see Removing a Media Card Reader).

5. If no screws are attached to the Media Card Reader, check the inside of the drive panel for shoulder screws. If screws are present, attach the screws to
the new card reader.

6. Slide the Media Card Reader into the drive bay until it clicks into place.

7. Attach the power and data cables to the back of the Media Card Reader.

8. Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.

9. Replace the drive panel (see Installing the Drive Panel).
1
drive-release latch
2
media card reader
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
1
media card reader
2
shoulder screws (4)
1
drive-release latch
2
media card reader