Specifications

33
STATUS CODE
-16
DESCRIPTION
Battery volts too high.
No
MEMORY
RECALL
CONTROL
TYPE
Traction
STATUS CODE
-15
DESCRIPTION
Battery volts too low.
No
MEMORY
RECALL
CONTROL
TYPE
STATUS INDICATION CRITERIA
Traction
Figure 1
Figure 1
SYMPTOM
Forward or reverse contactor will not pick up.
POSSIBLE CAUSE
Discharged battery
 Check battery for proper open circuit voltage as
outlined in figure 1 and charge battery if required.
Defective battery
 Check each battery cell for proper voltage (greater
than 1.95 volts at cell). Replace or repair battery.
Incorrect control card adjustment.
 Check function 15 for proper adjustment for
battery being used. See handset instruction
sheet for details. Adjust to proper settings.
This status code is displayed when the battery volts are
less than 1.95 volts per cell at initial start up. (See table
in figure 1).
SYMPTOM
Forward and reverse contactor will not pick up.
POSSIBLE CAUSE
Incorrect control card adjustment
 Check function 15 for proper adjustment for battery
being used. See handset instructions for details.
Adjust to proper setting.
Battery over charged or incorrect battery used.
 Check battery for proper open circuit voltage per
table in figure 1. If voltage excessive-check battery
charger for proper output voltage.
STATUS INDICATION CRITERIA
This status code is displayed when the battery volts
are greater than 2.40 volts per cell at initial start up.
(See table in figure 1.)