Operation Manual

ELECTRICAL CONNECTION (U.K. ONLY)

A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug

should be cut off from the mains lead, and on appropriate plug fitted, as below. warning: Very carefully dispose of

the cut off plug after removing the fuse: do not insert in a 13 Amp socket elsewhere in the house as this could cause

a shock hazard. With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the

plug is a moulded-on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved

fuse to BS 1362. In the event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can

be obtained from your nearest electrical dealer. The colour of the correct replacement fuse cover is that as marked on

the base of the plug.

WARNING - THIS APPLIANCE MUST BE EARTHED

IMPORTANT

The wires in the mains lead are coloured in accordance

with the following code:

Green and yellow Earth

Blue Neutral

Brown Live

As the colours of the wires in the mains lead may not cor-

respond with the coloured markings identifying the termi-

nals in your plug, proceed as follows:

The green and yellow wire must be connected to the ter-

minal in the plug marked with the letter E or the earth sym-

bol or coloured green or green and yellow.

The blue wire must be connected to the terminal marked

with the letter N or coloured black.

The brown wire must be connected to the terminal marked

with the letter L or coloured red.

N

E

L

I GB F D NL E P GR 2-08-2002 13:51 Pagina 2