Installation & Assembly

ManualsBrandsDelta Children ManualsBaby & KidsBentley Changing Table with Pad

Changing Table

Consumer Care:

www.DeltaChildren.com

Delta Children’s Products

114 West 26th Street

New York, NY 10001

Tele.212-645-9033

Need Help?

Please visit www.DeltaChildren.com/assembly-videos to

watch our easy and effective assembly videos

Conforms to

ASTM F2388

Safety Standards

Style #:

Lot:

Date:

___________

REV

This product is not intended for institutional or commercial use.

Este producto no esta hecho para uso institucional o comercial.

Read all instructions before assembly and use.

KEEP INSTRUCTIONS FOR FUTURE USE.

ADULT ASSEMBLY REQUIRED

Due to the presence of small parts during assembly, keep out of

reach of children until assembly is complete.

When contacting Delta Consumer Care please reference the above information. Before contacting Delta

Consumer Care please ensure that the information above matches the information found on the label on

the Top Shelf, please reference the information found on the product when contacting Delta Consumer

Care.

To register your product for important safety alerts and updates to your product please visit

www.DeltaChildren.com and click on Product Registration.

Summary of content (10 pages)

PAGE 1
Read all instructions before assembly and use. KEEP INSTRUCTIONS FOR FUTURE USE. ADULT ASSEMBLY REQUIRED Conforms to ASTM F2388 Safety Standards Due to the presence of small parts during assembly, keep out of reach of children until assembly is complete. Changing Table Need Help? Please visit www.DeltaChildren.com/assembly-videos to watch our easy and effective assembly videos Consumer Care: www.DeltaChildren.com Delta Children’s Products 114 West 26th Street New York, NY 10001 Tele.
PAGE 2
WARNING: Changing Table WARNING FALL HAZARD - to prevent death or serious injury, always keep child within arm’s reach. Read all instructions before use of the changing table. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE USE. Inspect the changing table periodically. Do not use the changing table if it is damaged or broken. Contact Delta Children’s Products with any questions. Tighten all loose screws and bolts before each use.
PAGE 3
PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. C. Back Top Rail x 1 Part # 21682 D. Back Middle Rail x 1 Part # 21683 A. Left End Frame x 1 Part # 21680 B. Right End Frame X 1 Part # 21681 E. Front Top Rail x 1 Part # 21684 F. Lower Rail x 4 Part # 21685 G. Top Shelf x 1 Part # 21686 H. Lower Shelf x 2 Part # 21687 J. Foam Pad x 1 Part # 13927 PARTS: HARDWARE KITS PART # 21689. K. M6 x35 mm Bolt x 14 M4 Allen Wrench Supplied No drills necessary. Do not use power screwdriver.
PAGE 4
Section 1: Changing Table Assembly Step 1 Parts and tools required to complete step D. Back Middle Rail x 1 K. M6 x35 mm Bolt x 6 F. Lower Rail x 4 M4 Allen Wrench Supplied E. Front Top Rail x 1 A. Left End Frame x 1 Attach (1) Back Top Rail (Part D), (1) Front Top Rail (Part E) and (4) Lower Rails (Part F) to the Left End Frame (Part A) with (6) M6x35mm Bolts (Part K) using the M4 Allen Wrench as shown. BE SURE THE GROOVES FACE TO THE INSIDE.
PAGE 5
Section 1: Changing Table Assembly Step 2 Parts and tools required to complete step G. Top Shelf x 1 H. Lower Shelf x 2 From Step 1 Rotate the Top Shelf Support 90 degrees. Lay the Left End Frame on the floor, Rails up. Slide the Top Shelf (Part G) in the grooves on the Back Middle Rail and Front Top Rail, into the groove on the Left End Frame, insert the pins on the Top Shelf into the holes in the rails. GENTLY PULL THE RAILS APART.
PAGE 6
Section 1: Changing Table Assembly Step 3 Parts and tools required to complete step From Step 2 K. M6 x35 mm Bolt x 6 M4 Allen Wrench Supplied B. Right End Frame x 1 Attach (1) Right End Frame (Part B) to the assembly from step 2 with (6) M6x35 mm Bolts (Part K) using the M4 Allen Wrench as shown.
PAGE 7
Section 1: Changing Table Assembly Step 4 Parts and tools required to complete step From Step 3 K. M6 x35 mm Bolt x 2 C. Back Top Rail X 1 M4 Allen Wrench Supplied Insert the tenon of the Back Top Rail (Part C) into the slot on the top of the Back Middle Rail (Part D), then insert (2) M6x35 mm Bolts (Part K), through the rear legs into the threaded inserts onto the Back Middle Rail (Part D). Tighten with the M4 Allen Wrench.
PAGE 8
Section 1: Changing Table Assembly Step 5 Parts and tools required to complete step M4 Allen Wrench Supplied J. Foam Pad X 1 From Step 4 1. Check that the bolt securing the strap is tight using the M4 Allen Wrench. 2. Insert the strap through the hole in the Foam Pad (Part J). 3. Place Foam Pad (Part J) on Top Shelf (Part G).
PAGE 9
Section 1: Changing Table Assembly Final RESTRAINT HARNESS SYSTEM USE: . PLACE THE INFANT ON THE CHANGING TABLE FOAM PAD. . POSITION THE RESTRAINT HARNESS OVER THE MIDDLE OF THE INFANT’S TORSO AND INSERT THE BUCKLED ENDS INTO EACH OTHER UNTIL THE LOCK SHUT WITH A CLICK. . GENTLY PULL THE LOOSE END OF THE STRAP TO LIGHTLY SNUG THE RESTRAINT HARNESS AROUND THE INFANT. MAINTENANCE . CHECK FASTENERS PERIODICALLY FOR TIGHTNESS. DO NOT OVER TIGHTEN. THIS MAY CAUSE DISTORTION OR BREAKAGE.
PAGE 10
Consumer Care: www.DeltaChildren.com Delta Children’s Products 114 West 26th Street New York, NY 10001 Tele.212-645-9033 Warranty: This Delta product is warranted to be free from defects for a period of 90 days from the date of purchase under normal use. This warranty extends only to the original retail purchaser and is valid only when supplied with proof of purchase, or if received as a gift, when the registration is on file with Delta.