Installation & Assembly

Section 1: Changing Table Assembly
Step 2
Parts and tools required to complete step
5
From Step 1
H
G. Top Shelf x 1
H. Lower Shelf x 2
H
G
G
D / E
G
Rotate the Top Shelf Support 90 degrees.
Lay the Left End Frame on the floor, Rails up. Slide the Top Shelf (Part G) in the grooves on the Back
Middle Rail and Front Top Rail, into the groove on the Left End Frame, insert the pins on the Top Shelf
into the holes in the rails. GENTLY PULL THE RAILS APART. Slide (2) Lower Shelves (Part H) in the
grooves on the Lower Rails, into the grooves on the Left End Frame as shown.