User Manual

Chapter 4 Display and Operation|ASDA-AB Series
4-6 Revision March 2008, Doc. Name: 2007PDD23000011
4.4 General Function Operation
4.4.1 Fault Code Display Operation
After entering the parameter mode P4-00 to P4-04 (Fault Record), press SET key to display the
corresponding fault code history for the parameter or press UP arrow key to display the fault code of H1
to H5 in order. H1 indicates the most recent occurred fault code, H2 is the previous occurred fault code
before H1 and so on. Please refer to the Figure 4.3. The recently occurred error code is 10.
Figure 4.3