Use and Care Manual

Delta Heat Service [phone] | 15
ASSEMBLY INSTRUCTIONS - CONT.
ROTISSERIE ASSEMBLY
For Larger Loads
1. Install the rotisserie motor horizontally as shown.
The motor socket hole will line up with the front
notch of the saddles.
2. Insert the rotisserie rod into the motor socket hole
and place the rod on the front notch of each saddle.
3. Remove the stainless steel grates.
4. Place a basting pan on top of the briquette trays to
catch the drippings. (Basting pan not supplied)
For Smaller Loads
1. Install the rotisserie motor horizontally as shown.
The motor socket hole will line up with the rear
notch of the saddles.
2. Insert the rotisserie rod into the motor socket hole
and place the rod on the rear notch of each saddle.
3. Place a basting pan on top of the stainless steel
grates to catch the drippings (basting pan not sup-
plied)
BATTERY LOCATION
INSTALL THE BATTERY
AS SHOWN