Use and Care Manual

14 | www.deltaheat.com
ASSEMBLY INSTRUCTIONS
The DELTA HEAT Grill is produced fully assembled and tested in the factory and requires no
major assembly in the eld. For the purpose of safe shipping and transit, some parts such as the
briquette trays and rotisserie components are wrapped inside the grill and require minor assembly.
Check to ensure that all packaging material have been removed prior to grill operation.
TO INSTALL BRIQUETTES TRAYS
1. Put briquette trays into the grill above the burner as shown by lining up the tab with the chan-
nel of the briquette tray.
2. Then put the stainless steel grates over the briquette trays.
WARMING RACK LEVEL POSITIONS:
The warming rack may be used to keep food warm and avoid overcooking the food. To install the
warming rack, use the hook to latch on at the rear hood panel as shown below (Fig. 3)
When the warming rack is not in use, it should be stowed away somewhere safe.
TAB CHANNEL
FIG. 3