Certifications 2

Color Colorless to white.
Odor Odorless.
Odor threshold Not available.
pH 6.7
Melting point/freezing point 32 °F (0 °C) estimated
Initial boiling point and
boiling range
212 °F (100 °C) estimated
Flash point Not available.
Evaporation rate Not available.
Flammability (solid, gas) Not available.
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Not available.
Flammability limit -
upper (%)
Not available.
Explosive limit - lower
(%)
Not available.
Explosive limit - upper
(%)
Not available.
Vapor pressure
Not available.
Vapor density
Not available.
Relative density Not available.
Solubility(ies)
Solubility (water) Completely Miscible
Partition coefficient
(n-octanol/water)
Not available.
Auto-ignition temperature Not available.
Decomposition temperature Not available.
Viscosity
Not available.
Other information
Density 1.00 g/cm3 estimated
Percent volatile > 99.9 %
Specific gravity 1.00 estimated
10. Stability and reactivity
Reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.
Chemical stability Material is stable under normal conditions.
Possibility of hazardous
reactions
Hazardous polymerization does not occur.
Conditions to avoid Contact with incompatible materials. Do not freeze.
Incompatible materials Strong oxidizing agents.
Hazardous decomposition
products
No hazardous decomposition products are known.
11. Toxicological information
Information on likely routes of exposure
Inhalation
Prolonged inhalation may be harmful.
Skin contact
No adverse effects due to skin contact are expected.
Eye contact
Direct contact with eyes may cause temporary irritation.
Ingestion
Expected to be a low ingestion hazard.
Symptoms related to the
physical, chemical and
toxicological characteristics
Direct contact with eyes may cause temporary irritation.
Information on toxicological effects
Acute toxicity
Material name: AMCO CLEAR® TURBIDITY STANDARD, 80 NTU
Revision date: Issue date: September-11-2015Version #: 018020
3 / 6