Manualshelf

Reference Manual

ManualsBrandsDelta Tau ManualsIntegrated Controller-AmplifiersDelta Tau GEO BRICK DRIVE
551552553554555556557558559560
Turbo PMAC/PMAC2 Software Reference
Turbo PMAC Memory and I/O Map 551
(bits 8-23; bits 0-7 not used)
Y:$07x427 MACRO Node 1 third 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
X:$07x427 MACRO Node 3 third 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
Y:$07x428 MACRO Node 4 24-bit command(write) and feedback (read) register
X:$07x428 MACRO Node 6 24-bit command(write) and feedback (read) register
Y:$07x429 MACRO Node 4 first 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
X:$07x429 MACRO Node 6 first 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
Y:$07x42A MACRO Node 4 first 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
X:$07x42A MACRO Node 6 second 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
Y:$07x42B MACRO Node 4 third 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
X:$07x42B MACRO Node 6 third 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
Y:$07x42C MACRO Node 5 24-bit command(write) and feedback (read) register
X:$07x42C MACRO Node 7 24-bit command(write) and feedback (read) register
Y:$07x42D MACRO Node 5 first 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
X:$07x42D MACRO Node 7 first 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
Y:$07x42E MACRO Node 5 first 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
X:$07x42E MACRO Node 7 second 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
Y:$07x42F MACRO Node 5 third 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
X:$07x42F MACRO Node 7 third 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
MACRO IC#
0
1
2
3
Address
$07843x
$07943x
$07A43x
$07B43x
Y:$07x430 MACRO Node 8 24-bit command(write) and feedback (read) register
X:$07x430 MACRO Node 10 24-bit command(write) and feedback (read) register
Y:$07x431 MACRO Node 8 first 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
X:$07x431 MACRO Node 10 first 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
Y:$07x432 MACRO Node 1 first 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
X:$07x432 MACRO Node 10 second 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
Y:$07x433 MACRO Node 8 third 16-bit command(write) and feedback (read) register
(bits 8-23; bits 0-7 not used)
X:$07x433 MACRO Node 10 third 16-bit command(write) and feedback (read) register