Reference Manual

Turbo PMAC/PMAC2 Software Reference
Turbo PMAC Memory and I/O Map 553
10 Prejog Input (J2-7)
11 Start (Run) Input (J2-8)
12 Step/Quit Input (J2-9)
13 Stop (Abort) Input (J2-10)
14 Home Command Input (J2-11)
15 Feed Hold Input (J2-12)
16 Motor/CoordSys Select Inp. Bit 0 (J2-3)
17 Motor/CoordSys Select Inp. Bit 1 (J2-5)
18 Motor/CoordSys Select Inp. Bit 2 (J2-13)
19 Motor/CoordSys Select Inp. Bit 3 (J2-14)
20 E51 Jumper (Reinitialize on power-on)
21 E50 Jumper: EAROM Write Enable
22 E49 Jumper: Wait State Control
23 E48 Jumper: Parity Control
Y:$078801 0 Thumbwheel Port Inp. Bit 0 (DAT0:J3-3)
1 Thumbwheel Port Inp. Bit 1 (DAT1:J3-5)
2 Thumbwheel Port Inp. Bit 2 (DAT2:J3-7)
3 Thumbwheel Port Inp. Bit 3 (DAT3:J3-9)
4 Thumbwheel Port Inp. Bit 4 (DAT4:J3-11)
5 Thumbwheel Port Inp. Bit 5 (DAT5:J3-13)
6 Thumbwheel Port Inp. Bit 6 (DAT6:J3-15)
7 Thumbwheel Port Inp. Bit 7 (DAT7:J3-17)
8 Thumbwheel Port Out. Bit 0 (SEL0:J3-4)
9 Thumbwheel Port Out. Bit 1 (SEL1:J3-6)
10 Thumbwheel Port Out. Bit 2 (SEL2:J3-8)
11 Thumbwheel Port Out. Bit 3 (SEL3:J3-10)
12 Thumbwheel Port Out. Bit 4 (SEL4:J3-12)
13 Thumbwheel Port Out. Bit 5 (SEL5:J3-14)
14 Thumbwheel Port Out. Bit 6 (SEL6:J3-16)
15 Thumbwheel Port Out. Bit 7 (SEL7:J3-18)
16 Jumper E40: Software Card Address Bit 0
17 Jumper E41: Software Card Address Bit 1
18 Jumper E42: Software Card Address Bit 2
19 Jumper E43: Software Card Address Bit 3
20 Jumper E44: Baud Rate Select Bit 0
21 Jumper E45: Baud Rate Select Bit 1
22 Jumper E46: Baud Rate Select Bit 2
23 Jumper E47: Baud Rate Select Bit 3
Y:$078802 0 Machine Input 1 (MI1) (J5-15)
1 Machine Input 2 (MI2) (J5-13)
2 Machine Input 3 (MI3) (J5-11)
3 Machine Input 4 (MI4) (J5-9)
4 Machine Input 5 (MI5) (J5-7)
5 Machine Input 6 (MI6) (J5-5)
6 Machine Input 7 (MI7) (J5-3)
7 Machine Input 8 (MI8) (J5-1)
8 Machine Output 1 (MO1) (J5-31)
9 Machine Output 2 (MO2) (J5-29)
10 Machine Output 3 (MO3) (J5-27)
11 Machine Output 4 (MO4) (J5-25)
12 Machine Output 5 (MO5) (J5-23)