Specifications

MACRO CPU Board Hardware Reference Manual
Jumper and Switch Configurations 13
SW2: MACRO Master Number Select
0: Commanded from Master IC # 0
1: Commanded from Master IC # 1 …
F: Commanded from Master IC # F (15)
Connector Summary
J1: ~* JEXP_A: for interboard connection
J2:
~* JEXP_B: for interboard connection
J3:
~* JEXP_C: for interboard connection
J4:
~* JISP: Factory configuration header
J5:
~* JTAG/OnCE: Factory troubleshoot header
J6: JTHW: Multiplexer Port Connector
J7: JRS232: Serial Port Connector
J14, J17: RJ45: MACRO Copper I/O (OPT C)
P1: JEXP: Backplane Expansion Port Connector
TB1: JPWR: 4-Pin Terminal Block
U73: MACRO Fiber Optic Connector (OPT A)
* Typically, these connectors are not designated as end-user interfaces. The pinouts are not included in
this hardware reference manual. Consult the factory if pinout information is needed.