Reference Manual

UMAC-CPCI Turbo CPU Board Hardware Reference Manual
Connector Pinouts 17
CONNECTOR PINOUTS
Compact UBUS Connector (J1) Pin-Out
Row Z A B C D E F
25 GND 5V 3.3V 5V GND
24 GND BD02 5V V(I/O) BD01 BD00 GND
23 GND 3.3V BD05 BD04 5V BD03 GND
22 GND BD09 BD08 3.3V BD07 BD06 GND
21 GND 3.3V BD13 BD12 BD11 BD10 GND
20 GND BD17 GND BD16 BD15 BD14 GND
19 GND 3.3V BD20 BD19 GND BD18 GND
18 GND BD23 GND 3.3V BD22 BD21 GND
17 GND 3.3V {BD26} {BD25} GND {BD24} GND
16 GND {BD30} GND {BD29} {BD28} {BD27} GND
15 GND 3.3V BWR- BRD- GND {BD31} GND
14 (KEY) (KEY) (KEY) (KEY) (KEY) (KEY) (KEY)
13 (KEY) (KEY) (KEY) (KEY) (KEY) (KEY) (KEY)
12 (KEY) (KEY) (KEY) (KEY) (KEY) (KEY) (KEY)
11 GND CS10- CS4- CS3- GND CS2- GND
10 GND CS16- GND 3.3V CS14- CS12- GND
9 GND IREQ2- IREQ1- MEMCS1- GND MEMCS0- GND
8 GND PHASE+ GND SERVO+ WAIT- IREQ3- GND
7 GND PHASE- WDO SERVO- GND GND
6 GND BA02 GND 3.3V BA01 BA00 GND
5 GND BA04 BA03 RESET- GND BX/Y GND
4 GND BA07 GND V(I/O) BA06 BA05 GND
3 GND BA11 BA10 BA09 5V BA08 GND
2 GND {BA15} 5V {BA14} BA13 BA12 GND
1 GND 5V -12V PWRGUD +12V 5V GND
Notes:
1. Row 25 is physically at the top of the connector in its “normal” orientation; Row 1 is at the bottom.
Looking from the front of the rack, Column Z is on the left; Column F is on the right.
2. Supply (Vxx & xxV) and ground pins are in the same locations as the Compact PCI bus.
3. Spaces marked (KEY) are for the mechanical key; these are not pins.
4. Pins marked with {} brackets are reserved for future use; the signals inside the brackets are proposed
for future expansion to a 32-bit data bus and 16-bit address bus.