Installation Guide

ManualsBrandsDelta ManualsBathroom Faucets15757LF-RB

SILICONE

Models/Modelos/Modèles

15757LF▲

Series/Series/Seria

SINGLE HANDLE LAVATORY

CENTERSET FAUCETS

LLAVES MONOCONTROL DE

MONTURA DE CENTRO PARA

LAVAMANOS

ROBINETS À ENTRAXE COURT À

UNE POIGNÉE POUR LA CUISINE

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

3/12/2018 Rev. C

88273

3/32"

(2.38 mm)

3/32"

(2.38 mm)

Specify Finish

Especifíque el Acabado

Précisez le Fini

Para instalación fácil de su llave

Delta

usted necesitará:

• LEER TODAS las instrucciones completamente antes de

empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

For easy installation of your Delta

faucet you

will need:

• To READ ALL the instructions completely before beginning.

• To READ ALL warnings, care, and maintenance information.

Pour installer votre robinet Delta

facilement,

vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes les

instructions de nettoyage et d’entretien;

www.deltafaucet.com

1-800-345-DELTA (3358)

customerservice@deltafaucet.com

Summary of content (6 pages)

PAGE 1
SINGLE HANDLE LAVATORY CENTERSET FAUCETS 88273 LLAVES MONOCONTROL DE MONTURA DE CENTRO PARA LAVAMANOS Models/Modelos/Modèles 15757LF▲ Series/Series/Seria ROBINETS À ENTRAXE COURT À UNE POIGNÉE POUR LA CUISINE Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. p Specify Finish Especifíque el Acabado Précisez le Fini E FL O N T You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: 3/32" (2.
PAGE 2
1A 1 2 3 5 4 6 2 1 1B 3 1 3 1 CONNECT TO WATER SUPPLIES. 5 Make sure all fittings and end connections are free of debris. Faucet connections (1) are 3/8" compression fittings. Secure metal nut on faucet supply hoses (2) to supply valve connection (3) and hand tighten, then tighten one additional revolution with wrench. DO NOT OVERTIGHTEN.
PAGE 3
A. B. 1 1 2 4 2 3 3 C. 3 4 D. 5 1 6 7 1 3 2 1 2 4 Install Pop-Up Assembly A. C. Remove stopper (1) and flange (2). Screw nut (3) all the way down. Push black gasket (4) down. B. Remove pivot nut (1). Install horizontal rod (2) and stopper (3) as removable (4) or non-removable (5). Hand tighten pivot nut (1). Attach horizontal rod to strap (6) using clip (7). Apply silicone to underside of flange (1). Insert body (2) into sink. Screw flange onto body.
PAGE 4
3 1 2 3 2 1 4 FLUSH SYSTEM / CHECK FOR LEAKS Remove aerator (1) using supplied wrench (2) or coin and turn faucet handle (3) all the way on. Slowly turn on hot and cold water supplies (4) and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts. Check all connections at arrows for leaks. Re-tighten if necessary, but do not over-tighten.
PAGE 5
Specify Finish Especifíque el acabado Précisez la Finition 2 RP78876 Valve Cartridge & adapter Válvula de Cartucho y adaptador Cartouche de Soupape et adapteur RP84377▲ Handle & Set screw Manija y Tornillo de presión Poignée avec et Vis de calage 1 RP84381 Bonnet Bonete Chapeau 3 RP84378▲ Cap Casquillo Capuchon de finition RP84385-1.2 1.2 GPM (4.
PAGE 6
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.