Specifications

DVP201/202/211LC-SL Load Cell Module Operation Manual
3.1 Installation
3.1.1 Connecting a Load Cell Module to a DVP-SV series PLC
 Pull the I/O module clips on a DVP-SV series PLC. Insert the points in the corner of a load cell module into
the four holes in the DVP-SV series PLC. Please see step  in the figure below.
 Press the I/O module clips on the DVP-SV series PLC, and make sure that the load cell module is tightly
connected to the DVP-SV series PLC. Please see step  in the figure below.
DV P28SV
RUN
STOP
2
2
11
DVP211LC
-
3.1.2 Installing a DVP-SV series PLC and a Load Cell Module on a DIN
rail
 Please use a 35 mm DIN rail.
 Pull the DIN rail clips on a DVP-SV series PLC and a load cell module. Install the DVP-SV series PLC
and the load cell module on the DIN rail.
 Press the DIN rail clips on the DVP-SV series PLC. Please see the figure below.
35 mm DIN rail
DVP211LC
3-2