Technical Specifications

 Single-cast trunnion system results in incredible vibration control providing continuous smooth operation and dependable
accuracy
 Dual front cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
 The bevel dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4°
 The cabinet construction consists of a large cast-iron base providing stability and solid footing
 Improved table top geometry provides more surface area than other cabinet saws.
 The largest blade opening in class makes fine tuning your riving knife and blade changes easier than ever
 The push button arbor lock makes the blade changing process simple and more natural with the use of only one wrench
 Large, easy to access ON/OFF switch is multi-directional and can be activated from any angle
 Bi-Level dust extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the
closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection
 Tool-free split guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the
throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools
 BIESEMEYER
®
Fence System includes hairline pointer and built-in tape allowing you to make precision set-ups, cut after
cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an over
center cam lock
 Motor: 3 HP, wired 230V, 1 Phase, 60 Hz
 Arbor Size: 5/8 in.
 Blade Diameter: 10 in.
 Blade Speed: 4,300 RPM
 Max Rip to Right Of Blade: 52 in.
 Max Rip to Left Of Blade: 13 1/2 in.
 Depth of Cut at 45°: 2 1/8 in.
 Depth of Cut at 90°: 3 1/8 in.
 Distance, Front of Table to Center of
Blade: 18 1/2 in.
 Table in Front of Blade at Max Depth of
Cut: 13 1/2 in.
3 HP 10 in. Left Tilt UNISAW
®
with 52 in. BIESEMEYER
®
Fence
36-L352
 Max Width of Dado: 1 1/8 in.
 Miter Gauge Groove: 3/8 in. x 3/4 in.
 Chip Exhaust Opening: 4 in. and 5 in.
 Table Height: 35 in.
 Table Size:
o Size of Cast Iron Top (with wings only): 31 in. x 40 in.
o Size with BIESEMEYER
®
Table, Wing & Laminate
Board: 31 in. x 82 in.
 Length: 84-1/2 in.
 Width: 37 in.; With Fence on Saw: 46 in.
 Height: 35 in.
 Weight: 661 lbs.
Specifications
Features